Tweet
JBL C608GTI. VAUT 700$... POUR 250$
NEUF DANS BOITE DORIGINE. J'ai acheter ce kit en passant le mettre dans mon nouvel auto. mais a ma grande surprise j'avais du dynaudio d'origine dans l'auto. donc je le vend pour des peanuts.
DESCRIPTION:
Anodized aluminum Plus One™ (patent pending) woofer cone creating 30% more cone area, higher efficiency and bass output.
Phase plug for uniform off-axis frequency response.
Optimized Nitro-Buthylene (NBR) low-loss surround that damps cone break-up modes.
Heavy-duty cast aluminum vented basket to accommodate long suspension travel, increase power handling and reduce magnetic field losses.
Intermount™ III system includes adapter rings for various mounting configurations.
NPC (Nomex, Polyester and Cotton) spider for high power handling and lower distortion.
Symmetrical Field Geometry (SFG™) motor technology with a new flux stabilization ring designed to dramatically reduce distortion.
Pure titanium 25mm edge-driven tweeter with I-Mount™ (patent no. 5,859,917).
4th Order Linquitz-Riley acoustic outboard passive crossover.
Rubber tweeter surround for low resonance.
SPECIFICATION:
General
Size 165mm
Type Component 2 ways
Power Handling 600W
Power Handling, RMS 150W
Impedance 4 Ohms
Sensitivity (2.83V @ 1m) 89dB
Frequency Response 50Hz - 21kHz
Mounting Depth 69mm
Cut-Out Diameter 131mm
Crossover Frequency 4th-Order, 3500Hz, 24dB/octave
Revc 3.5
Levc 0.25
Vas 7.9
Mms 18.21
Fs 58.61
Qms 9.01
Qes 0.52
Qts 0.5
Voice-Coil Diameter 50.8mm
FRED
514-434-7447
MSN : FRED0706@HOTMAIL.COM
NEUF DANS BOITE DORIGINE. J'ai acheter ce kit en passant le mettre dans mon nouvel auto. mais a ma grande surprise j'avais du dynaudio d'origine dans l'auto. donc je le vend pour des peanuts.
DESCRIPTION:
Anodized aluminum Plus One™ (patent pending) woofer cone creating 30% more cone area, higher efficiency and bass output.
Phase plug for uniform off-axis frequency response.
Optimized Nitro-Buthylene (NBR) low-loss surround that damps cone break-up modes.
Heavy-duty cast aluminum vented basket to accommodate long suspension travel, increase power handling and reduce magnetic field losses.
Intermount™ III system includes adapter rings for various mounting configurations.
NPC (Nomex, Polyester and Cotton) spider for high power handling and lower distortion.
Symmetrical Field Geometry (SFG™) motor technology with a new flux stabilization ring designed to dramatically reduce distortion.
Pure titanium 25mm edge-driven tweeter with I-Mount™ (patent no. 5,859,917).
4th Order Linquitz-Riley acoustic outboard passive crossover.
Rubber tweeter surround for low resonance.
SPECIFICATION:
General
Size 165mm
Type Component 2 ways
Power Handling 600W
Power Handling, RMS 150W
Impedance 4 Ohms
Sensitivity (2.83V @ 1m) 89dB
Frequency Response 50Hz - 21kHz
Mounting Depth 69mm
Cut-Out Diameter 131mm
Crossover Frequency 4th-Order, 3500Hz, 24dB/octave
Revc 3.5
Levc 0.25
Vas 7.9
Mms 18.21
Fs 58.61
Qms 9.01
Qes 0.52
Qts 0.5
Voice-Coil Diameter 50.8mm
FRED
514-434-7447
MSN : FRED0706@HOTMAIL.COM